Solar Cell Penal Tester Sorter

Solar cell panel tester IEC60904-9 (A grade) Light nonuniformity, instabilityA grade Voc,Isc,Pmax,Vm,Im, FF,EFF,Temp,Rsh

Solar Cell Panel Tester Sorter

 

Products character •Adopts pulses Xeon-lamp as Simulation photosource, special material cavity reflection device realize high uniformity of the simulated sunlight, avoid the influence caused by temperature from steady-state sun simulator to the testing result•spectrum meet IEC60904-9 spectral irradiance distribution of  requirements (AM1.5)•Software can display the I-V curve of the interface record of the current work and automatically preserved main test parameter of all module to the assigned folder. The specified file can be self-named, support data summary and print.•Test Parameter is including Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs, Rsh

 Application• Used in the filtration of solar cell testing

Technical parameters 

Model	KJG-S-3A	KJG-S-B
Spectrum	Meet the IEC60904-9 requirement (A grade)
Single light width	10ms
Light intensity	100mW/cm2 (adjustment range: 20-120mW/cm2)	100mW/cm2 (adjustment range: 70-120mW/cm2)
Light nonuniformity	≤±2%(A grade)	≤±3%
Light Instability	≤±2%(A grade)	≤±2%
Consistency of test result	≤±0.5%	≤±1%
Electricity properties testing error	≤±1%	≤±2%
Test range	0.1W-5W
Test area	200mm*1100mm
Test current	0A-20A (distinguishability 1mA)
Test Voltage	0V-0.8V(distinguishability 1mV)
Test speed	3 seconds/ sheet
Data acquisition quality	5000 data point (I-V Curve)
Test parameter	Isc,Voc,Pmax,Vm,Im,Ir,FF,EFF,Temp,Rs, Rsh
Power source	220V/50Hz/2kW

Machine installation

1. Test machine (include Electronic load detector): 1 set

Light source: 1 pieceSpecial software: 1 pieceStandard cell(use for adjust light intensity and uniformity): 1 setTest table: 1 pieceSynchronous high-speed A/D integrated circuit board: 1 piece

Customer will prepare by themselves:

1. Computer: 1 Set

2. A4 printer: 1 Set

Solar Cell Penal Tester Sorter