Solar Cell Module Tester

Solar cell module tester Light instability nonuniformity (A grade) IEC60904-9 (A grade) Voc,Isc,Pm,Im,Vm,FF,EFF,Temp

Solar Cell Module Tester

 

Products character• It adopts horizontal box and downwards light optics design, suitable for intermediate testing and solar module final testing.•Adopts large pulses Xeon-lamp as Simulation photosource, ceramic cavity reflection device realize high uniformity of the simulated sunlight, avoid the influence caused by temperature from steady-state sun simulator to the testing result•Simulator light spectrum meet IEC60904-9 spectral irradiance distribution of A-level requirements•Light intensity 120Mw/cm2 (adjustment range: 50-125Mw/cm2)•Advanced precision constant light control technology, radiation instability: :±3%(A grade)• Pulsed xenon lamp imported from Germany, with a special filter optical component, ensure test source spectrum correctly, long lifetime of use•Counting function of flashes(Zero reset when replacement)

•Auto or manual temperature compensate and light intensity compensate

Application and MarketSpecially used in testing mono-crystalline silicon, poly-crystalline silicon, amorphous-crystalline silicon solar cell module.

 

Technical parameters 

Model	KJG-T-3A	KJG-T-B
Spectrum	Meet the IEC60904-9 requirement (A grade)
Single light width	10ms
Light intensity	100mW/cm2 (adjustment range: 20-120mW/cm2)	100mW/cm2 (adjustment range: 70-120mW/cm2)
Light nonuniformity	≤±2%(A grade)	≤±3%
Light Instability	≤±2%(A grade)	≤±2%
Consistency of test result	≤±0.5%	≤±1%
Electricity properties testing error	≤±1%	≤±2%
Test range	1600mm 5W-300w
Test area	2000mm*1100mm
Test current	0A-20A (distinguishability 1mA)
Test Voltage	0V-100V(distinguishability 1mV)
Test speed	5 seconds/ sheet
Data acquisition quality	8000data point (I-V Curve)
Test parameter	Isc,Voc,Pmax,Vm,Im,Ir,FF,EFF,Temp,Rs, Rsh
Power source	220V/50Hz/2kW

Machine installation

1. Test machine (include Electronic load detector): 1 set

2. Light source: 1 piece

3. Special software: 1 piece

Standard cell(use for adjust light intensity and uniformity): 1 setHorizontal wheel test slide: 1 set

6.  Synchronous high-speed A/D integrated circuit board: 1 piece

Customer will prepare by themselves:

1. Computer: 1 Set

2. A4 printer: 1 Set

Solar Cell Module Tester